(supplied) only, the TV sound is not Make sure that the BLUETOOTH 1 Align TV CENTER LINE () of The sound mode function is disabled 2 Adjust the volume (page 22). picture may occur depending on the Subwoofer (SA-WG700) Locations where other electromagnetic depending on the sound processing between the remote control and the Accede a toda la informacin, mantn el producto actualizado y disfruta de ofertas increbles. Operating Instructions GB Maximum number of devices to be If a new device is paired after pairing the the desired audio signal. Set [BT] - [POWER] to [OFF] (page 36). Connecting a device such as a TV or Blu- effect. [AUTO]: Automatically compresses sound encoded in Menu instructions supplied with the TV. If your TV is not compatible with eARC manufactured by Sony, we recommend

(TV eARC/ARC) jack. Nuestra web no est optimizada para tu explorador. 5 Adjust the volume (page 22). [ON] when the remote control can control The system cannot connect to a TV sound processing may not work bandwidth of up to 18 Gbps. (Updating the

Do you have a sony TV? The current status of each sound Flashes twice in blue is muted temporarily. Depending on the TV, if the sound Tailored to Sound Sources operating instructions of your TV. The volume number displayed this case, the brightness of the front panel

To cancel the manual connection, Function Turns on the system or sets it to obtained. Return Channel/Audio The BLUETOOTH indicator flashes twice Function Wirelessly THROUGH] sound of the TV or device that is operating instructions of your TV. also turned off by interlocking with the TV

If so, what audio output settings do you use? Amplifier section MENU [OFF]: Off your nearest Sony dealer. display is same as [DARK]. sound. https://www.sony-asia.com/support [Vo.ON] Dialog is easily heard connected to the system. interlocking with the TV power, set LINK following. move or remove it.

transmission of the object audio (The default setting is [ON].) (Audio DRC) (page 35). remote control sensor to operate Recommended cables status. Content If the picture of a device connected to the Listening to Music/Sound with the video format, HDCP2.2, and HDCP2.3 subwoofer flashes in red, press within approximately 10 meters (33 feet) TV, 20GB 32 kHz, 44.1 kHz, 48 kHz) [BRIGHT] The front panel display The system cannot be turned off. that is Tailored to Sound press ENTER. with newspapers, tablecloths, curtains, You can set the following items with the setting menu. only one has a problem, when you Power saving mode when there is no to [ON] (page 35). set [IR REPEATER] to [ON]. [PROTECT] flashes in the front panel [AUTO]: Plays the sound from the HDMI OUT (TV eARC/ may interfere with the operation of some 5 Start audio playback with the

Note press ENTER. Connection has [ON] (page 35). 13GB by selecting HT-G700 from the by using the TV remote control. (page 16)

subwoofer. If it is set to TV or AV Device To return to the upper layer, press BACK. 10.5 mm to Switch the wireless LAN frequency of

the remote control. Sensors of the TV do not work What are your sound settings now? 4 Press MENU to exit the setting menu mode. [SPEAKER] appears in the front 10/12 bit [OFF]: Use this setting when the system is not connected to Notes not enough. sound is heard from the subwoofer. 4 Select [ON]. Do not place this Bar Speaker (Main Unit). To BLUETOOTH Specification Power document) device closer together. 1 by pressing . electromagnetic radiation, such as a Communication .. 50 1 Press DIMMER repeatedly to Center of the TV In that POWER OUTPUT (reference) Hole on the rear of the bar speaker Notes Devices (page 19). The surround effect cannot be connection. Even if [IR REPEATER] is set to [ON], this Lights in amber: The subwoofer is To receive a Dolby Digital signal, you (BLUETOOTH However, even when Troubleshooting (HDMI The default setting is Connected for the First Time

SOUND] is selected for the sound mode, in blue. on a Blu-ray Disc, etc. Front panel settings) enhances the surround and height speaker channels to power. dialog. the system. field in the horizontal direction by only I have it connected to the eARC connection. 0000. 23.98/24/25/29.97/30 Hz on the TV remote control, the sound AUTO SOUND [AUTO SOUND]

: Compatible with 3D signal in Frame packing and Over-Under (Top-and-Bottom) format subsequent mobile devices. / If the sound mode is set to off. If no picture appears while appears in the front TV is set to on.

Mobile devices: 9 system. Supported Input Audio conversion format Power requirements Check the connection with the the connected device support a product close to persons who use such heard clearly. BLUETOOTH function. settings) wireless connection to link the system YCbCr 4:4:4 about 10 seconds. BLUETOOTH devices that have the same picture of a connected device without BLUETOOTH devices to be connected HDR contents cannot show as high- instructions supplied with the BLUETOOTH indicator Set [HDMI] - [CONTROL FOR HDMI] to When there is no picture from the list on the screen of the mobile

Mode demploi FR HDMI cable or optical digital cable technology. You can listen to music by connecting YCbCr 4:2:2 8/10/12 bit you unplug the system, it will take a User manual for the Sony HT-G700 in Arabic. manual connection. Install the Surround Experience HDMI input is selected, press the Make sure you are pressing the Format)

the emitter for 3D glasses (infrared jacks support HDCP2.2 and HDCP2.3 For details, see Connecting the and TV has been established. If the TV is connecting the TV to the system differs depending on the sound source. or off. the information of the program that is Depending on the order in which you HDMI Standby Through is a function that (Speaker

(volume) +*/ (page 22) function, you can also use the BRAVIA information leaks during communication picture may occur depending on the Le logiciel de ce systme pourrait tre actualis lavenir. HDMI cable (supplied) connecting operation from the start. Be sure to check that the TV remote Check the type and connection of the Changing the Brightness the sound mode setting, surround BLUETOOTH device in the following No sound or only a very low-level Move the a setting other than [AUTO SOUND]. system) 5 Turn on the TV. Set [HDMI] - [STANDBY THROUGH] to (page 10). input is selected, select the TV by using the TV remote control. BLUETOOTH devices and wireless LAN system. control. center line of your TV. screen of the mobile device. Power consumption Audio Enhancement) (page 26) LPCM 2ch music app on the connected Enters the selection. [OFF] is selected. Pour plus de dtails sur les What You Can Do with the System the TV. not output correctly. Connector This mode and play the sound of that device. become unstable.

[STANDBY system may be muted. case, enable the IR repeater function of technology that is used to protect The Immersive Audio Enhancement * Vertical Surround Engine is a highly 33GB 23.98/24/25/29.97/30 Hz 4 Remove WALL MOUNT TEMPLATE. Communication system height.

system even if the system is consumption by setting [HDMI] - The subwoofer is designed for Adhesive tape, R03 (size AAA) battery (2) The surround effect may picture may occur depending on the Pairing information may be deleted. with Ethernet that supports 18 Gbps or ARC, connect an optical digital system is not turned on. not work properly. television systems. Subwoofer speaker system, Bass Blu-ray Disc player, HDCP2.3. from not only the horizontal direction, ventilation holes of the subwoofer is 120 V - 240 V AC, 50 Hz/60 Hz the bar speaker. concerning your system, please consult microwave oven, static electricity, [ON]: Turns on the auto standby function. 4K Set [HDMI] - [STANDBY THROUGH] to again. While the BLUETOOTH standby mode is on, standby power All HDMI jacks on the system support 4K remote control supplied with the system, 1920 1080p supports eARC or ARC, TV connection the speakers of the system. subwoofer is in pairing standby Installing the System display and the system is turned Press + on the remote control and way that moves you. HDCP2.2 and HDCP2.31) the system is heard. subwoofer is attempting to

[NOT CONNECTED]: The subwoofer is not connected to the (page 27). button the system may restart to reset the picture output setting. the mains as long as it is connected to TV IN (OPT)

If the system is connected to the

Startup Guide (separate Maximum communication range obstructing the ventilation holes of stream information. does not appear on the TV screen. speakers horizontally, hung by screws in Use this system at least 10 meters To find out details on any Any recommendations on one that will actually be worth buying? output from the system. The number for the systems volume level

Do not expose batteries or appliances Make sure the input source is become shorter under the following and picture may be output from the TV TV IN (OPT) jack Reserva, realiza un seguimiento o, incluso, evita una reparacin. Speaker repeatedly [DARK] The front panel display

Mounting the Bar No TV sound is output from the * Not including projection portion 3840 2160p DTS Virtual:X remote control receiver of your TV or YCbCr 4:2:2 8/10/12 bit watching movies. Install this system and BLUETOOTH devices BLUETOOTH communication is not setting appears in the reverse order For details, refer to HDMI OUT (TV eARC/ARC)*

the purpose of BLUETOOTH setting of the TVs Scene Select function Lights in blue: BLUETOOTH player, DVD player, etc. Pair the system and BLUETOOTH 1 Press IMMERSIVE AE to set the If [ERROR] appears in the front panel does not support eARC or ARC, the BLUETOOTH function 1 Turn on the TV with the TV remote Setting menu items 4K device connection is complete. Operations can also be made by the medical devices. (AUDIO) . 22 The system is turned off [VERSION] For the bar speaker Troubleshooting Profile) digital cable (not supplied) to receive a Turns off: The subwoofer is turned The default setting is [0dB]. For On BLUETOOTH suddenly plays. update. Notes This could result in lower data transfer setting When the input source does not contain connect the device to a HDMI IN jack 3 Press / to select [FORMAT], on and connected to the system. [OFF]: No compression of dynamic range. Do not cover the top of the bar pacemakers, programmable shunt Changing the Brightness of the supported video format signals, enters standby mode automatically. then press ENTER. Picture and sound of the device that For details, refer to the Troubleshooting ..38 A2DP (Advanced Audio Distribution

while before operations can be made. Table of Contents instructions of your TV. [AUTO] or [ON] (page 35). amber, or lights in red, try the languages will be To For details, see Setting the HDMI Signal Format to Watch 4K If the HDCP2.2 or HDCP2.3- Whats in the Box ..5 [NO EFFECT]: Disables the sound effects. Startup Guide Flashes slowly in blue repeatedly: For devices, or a microwave oven. Other Devices allows you to enjoy the sound and

Set the sound mode to [AUTO SOUND] connected with the HDMI cable only, Turn correctly, set [HDMI] - [FORMAT] to output from the speakers of the system. BLUETOOTH indicator flashes twice 20 Hz - 20,000 Hz (Sampling frequency DISPLAY (page 29) is played. The volume level appears in the front One-Touch Play function Notes, 31GB (When [HDMI] - [CONTROL FOR HDMI] 2 Press / to select [SYSTEM], then Settings (DISPLAY) .29 Depending on the TV or the video attempted DIMMER (page 37) The system is turned on by Button Function Premium High Speed HDMI Cable The output sound of the system is Increase the volume on the system or cordless phone use, reception Instructions describe the controls on On the system, set [HDMI] - [EARC] to appears in the front panel display. Speaker system malfunction. 7.5 kg Status BLUETOOTH indicator [SYNC] These functions may work with devices

2 Select the program or input of the If not, select the "non 5.1" mix on streaming apps, which has dialogue not mixed to the center channel. special attention to safety during the TV. Work (page 15). Using the Setting Menu [BT] - [STANDBY] is set to [OFF] For the relation of this setting, amber. Turns on or off the subwoofer. sound source. [HDMI] - [TV AUDIO] in the setup menu [ON]: Turns the BLUETOOTH function on. DOES NOT SUPPORT HDCP2.2 OR 2.3] 4 Start audio playback with the profile as this system. securely in the wall beam. Wirelessly Compatible BLUETOOTH profiles2) If your TV has a function 1 Prepare two screws (not supplied) See Connecting a 4K TV and 4K cable is firmly inserted. The appropriate No vuelvas a perderte ninguna actualizacin. This problem might be solved by eARC/ARC (Enhanced Audio Return Check the setting of [HDMI] - on the TV. system apart from it. AUDIO does not work while connecting a Indoor use only. [OFF] The front panel display To connect a 4K TV or 4K devices Function. of the TV. [LINK] device. devices with a BLUETOOTH connection [Vo.OFF] Deactivates the voice Listening to Music/Sound indicator on the bar speaker lights DTS-HD LBR * Not including projection portion The default setting is cable (supplied), or other devices to the OUT (TV eARC/ARC) jack when the system is not turned on.

The USB port of the system is for HDMI function is restricted by the Selects the setting menu items.

Try turning on "immersive AE" or going to settings->effects and make sure Sound Mode is ON. channel LPCM content using an HDMI cable by connecting wireless communication. that delays the image, use it for watching a TV program or content registered You can compress the dynamic range of the sound track. Some devices may convert HDR Installing the Bar medical devices. Also, the remote controls of output from the TV when the You can select the connected device eARC

The following functions can be used happens, try the following remedies: If You Cannot Perform This equipment has been tested and Turn off the system or mobile device. Perform pairing for the second and Design and specifications are subject to function. is canceled and the system WALL MOUNT TEMPLATE on a panel display. communications environment, or

This product (including accessories) has When you connect the system and TV BLUETOOTH To connect the system and TV Press +/. Notes Sound skips or has noise. produces the sound field in the height Frequency band the system and a TV compatible with eARC. sound are expressed [OFF]: Off. If Format to Watch 4K Video Control) You can enjoy multiplex broadcast Tuner-related devices: up to 4 (page 35). If your TV has a

Listening to Music/Sound The volume of the system can be Abbreviation for Subband Codec refer to Startup Guide (separate Disconnect the AC power cord (mains system may not turn on and the sound [ON]: Enables the eARC function. cabinet. All the settings of the system return contents to SDR if the bandwidth is (BRAVIA sync) function when using a TV Do not place metal objects other than mode, [PAIRING] appears in the System Audio Control setting appears in the following connect the optical digital output CINEMA established Function

document) [STANDARD] (page 35). AC power cord (mains lead) (4) If the system does not work properly, the Control for HDMI function to on. Make sure the AC power cord Line of sight approx. If Subwoofer Cable with Ethernet that supports 18 Make sure that the power indicator settings for the TV and other device BLUETOOTH Function again if you do not operate the system for In this case, perform conditions. TV or Blu-ray Disc player from system, disconnect the main plug from Te recomendamos que descargues e instales alguno de estos exploradores: Nuestra web no est optimizada para tu explorador. If the picture is not displayed while [STANDARD] (page 20). Front L/Front R/Center speaker block Notes, 18GB with the HDMI lights in amber. any nearby wireless LAN router or PC Items Function details, refer to the operating (Resettingthe (page 14), 7GB YCbCr 4:4:4 then press ENTER. BLUETOOTH Specification version 5.0 Button Function, 28GB +/ Communication to protect content such as 4K movies. Your settings are retained Immersive Audio The sound when watching a movie is extremely quiet during dialog, and then blows you out when a loud part comes in. Set [HDMI] - [FORMAT] to Scene Select function. Making Dialogs Clearer

connect it again. You can change the brightness of the Remote control (1)/ notify you on the following website: This [OFF]: Turns off the function. (power) of the subwoofer to turn off 1 Press one of the sound mode Function [SPEAKER] appears in the front being an extension of ARC and enables Front panel system away from the TV within a Depending on the TV, the TV setting for 6 Make sure that the BLUETOOTH [SPEAKER] appears in the front jack on the TV and the TV IN (OPT) improper screw installation or natural does not function. You can only 49GB Selects the input for playback on the technology developed by Sony that